前置作業:

一、系統需求 安裝前請先參考系統需求(如下)，完成需求(注意需要的windows hotfix)。 http://www.datacore.com/Software/Products/SANsymphony-V-Prerequisites.aspx

注意：安裝前請先定義好主機名稱，dataCore安裝後，主機名稱不能改!!!

二、參考官網:List of all DataCore Qualified Products

三、參考官網:Known Issues for Third Party Hardware and Software

四、參考官網:Best Practice

五、BIOS建議設定

1. Disable any overriding OS Power control settings such as Collaborative Power Control.

2. Set the Power Regulator Mode to Static High Mode.

3. Disable Processor C-State Support.

4. Disable Processor C1E Support.

5. Set Power Management to Maximum Performance

6. Disable Intel Turbo Boost. (Disable TurboMode if this is needed to see TurboBoost)

7. Disable Hyper-Threading

8. Enable Node Interleaving

9. Enable CPC (see above Command Per Clock)

10. Hemisphere Mode to Auto

六、電源選項 –“高效能”

7.建議將Server的韌體都更新過。驅動程式(Raid Card和網卡)也都更新至最新。

開始安裝

設定DcsAdmin密碼 (此密碼請記錄下來。如果是要做HA，兩台密碼要一樣!!!)

Finish後重開機